DISCLAIMER: This product is not affiliated with any manufacturers whose products are to be refilled with this SharpJet product. Those manufacturers have not sponsored nor have they approved this SharpJet product. Furthermore, the use of any trademarks of any of the manufacturers of the products to be refilled with the SharpJet product is not to be construed as indicating that the SharpJet refill products source of origin, approval, sponsorship or affiliation is in any way associated with those manufacturers.
Epson S020093 used in Epson Stylus Color 400/500/600/Photo/Photo 700/Photo EX S020108 used in Epson Stylus Color 800/850/850N/850Ne/1520 S020187 used in Epson Stylus Color 440/640/Photo 750/Photo 1200 S020189 used in Epson Stylus Color 740

  1. Remove black or color ink cartridge from printer and Protect work surface. Seal ink port firmly with seal or piece of tape. Seal each port individually.
  2. Secure ink bottle while filling the syringe with ink. Fill syringe with 6 ml. of ink, being careful not to draw air bubbles into syringe.

  3. Hold the cartridge with ink ports facing downward. Lift label and enlarge filling hole in middle of cartridge with drill bit. At a 45 degree angle, insert needle toward front of cartridge. Inject the ink slowly. When cartridge is full, remove needle, seal fill hole with tape and replace label.

  4. Let cartridge stand outside printer, label side facing up and ink port hole down, for 4-5 hours before returning to the printer for use.
  5. Reinstall the cartridge into printer. Perform print head cleaning procedure by following the instructions outlined in your printer manual. Repeat cleaning procedure several times until colors are printing.